钢骨钢管高强混凝土长柱承载力可靠度分析

肖阿林; 何益斌; 郭健; 黄频

doi:10.11835/j.issn.1674-4764.2009.05.006

您当前的位置：

首页 >

文章列表页 >

钢骨钢管高强混凝土长柱承载力可靠度分析

更新时间：2023-11-28

- 钢骨钢管高强混凝土长柱承载力可靠度分析
- Reliability Analysis on Ultimate Bearing Capacity of SteelReinforced HighStrength Concrete Filled Steel Tubular Slender Columns
- 土木与环境工程学报（中英文） 2009年31卷第5期页码：31-37
- 作者机构：
  
  湖南大学土木工程学院,湖南,长沙,410082
- 作者简介：
- 基金信息：
  
  湖南省科技计划项目（2008GK312）;湖南省杰出青年基金资助项目(05JJ10009)
- DOI：10.11835/j.issn.1674-4764.2009.05.006
  中图分类号：
- 纸质出版：2009
- 稿件说明：
移动端阅览
肖阿林, 何益斌, 郭健, 等. 钢骨钢管高强混凝土长柱承载力可靠度分析[J]. 土木与环境工程学报（中英文）, 2009,31(5):31-37.

XIAO Alin, HE Yibin, GUO Jian, et al. Reliability Analysis on Ultimate Bearing Capacity of SteelReinforced HighStrength Concrete Filled Steel Tubular Slender Columns[J]. Journal of Civil and Environmental Engineering, 2009, 31(5): 31-37.
肖阿林, 何益斌, 郭健, 等. 钢骨钢管高强混凝土长柱承载力可靠度分析[J]. 土木与环境工程学报（中英文）, 2009,31(5):31-37. DOI： 10.11835/j.issn.1674-4764.2009.05.006.

XIAO Alin, HE Yibin, GUO Jian, et al. Reliability Analysis on Ultimate Bearing Capacity of SteelReinforced HighStrength Concrete Filled Steel Tubular Slender Columns[J]. Journal of Civil and Environmental Engineering, 2009, 31(5): 31-37. DOI： 10.11835/j.issn.1674-4764.2009.05.006.

摘要

基于《建筑结构可靠度设计统一标准》(GB500682001)，利用一次二阶矩法（JC法）对钢骨〖XC半字线.tif

JZ〗钢管高强混凝土轴压长柱的极限承载力进行了可靠度分析，研究了可变荷载组合类型、荷载效应比、混凝土强度等级、钢管壁厚、钢骨截面面积、钢材屈服强度及长细比对组合柱承载力可靠指标的影响。分析结果表明，在工程常用长细比范围内，各公式的可靠指标均能满足规范对延性构件可靠度指标的要求；在所研究参数范围内，长柱的可靠度指标随荷载组合和荷载效应比的变化而变化，随混凝土强度等级的提高而增大，随钢管壁厚的增加而有所降低，钢骨截面面积对长柱的可靠指标无明显影响，同时，钢材屈服强度和长细比对各公式可靠指标的影响各不相同。

Abstract

The first degree second order moment method (JC method) recommended in Unified Standard for Reliability Design of Building Structures (GB500682001) was applied to analyze the reliability of steelreinforced highstrength concrete filled steel tubular slender columns. Several performances were studies

which were the influences of different load combinations

specific values of loads

strength grades of concrete

thickness of steel tube

area of crosssection of structural steel

steel yield strength and slenderness ratio on the reliability of the composite column. It was found that

when the slenderness ratios were within common range

the reliability indexes of the proposed formulae satisfied the demand of GB500682001 for plastic material on the whole. And it was concluded that the reliability index varied with the load combination and specific value of loads. The reliability index increased with the increase of concrete strength grade and decreased with the increase of steel tube thickness. Furthermore

steel yield strength and slenderness ratio had different influences on the reliability indexes.

关键词

Keywords

references

浏览量

770

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据